Open | Tue–Fri: 10am–6pm | Sat: 9am–4pm | Sun–Mon: Closed
Velocity Quill 28H Track Wheelset - Phil Wood Hubs
HANDBUILT These wheels are hand-built by master wheel builder, Steven Craft, for GEAR Shop Brisbane.
VELOCITY QUILL RIM The Quill is our most innovative road rim to date. Utilising design technology from our Aileron disc rim, we’ve evolved our most successful and proven A23 road rim and developed the Quill to be, stiffer, and wider than its predecessor.
The Quill rim is 17.2% wider internally, 26.2% laterally stiffer, and 99.3% radially stiffer than the A23.* Featuring an outer width of 24.5mm and an internal width of 21.1mm, the Quill’s voluminous width provides riders with substantial lateral stiffness even in lower spoke counts and increased ride quality and control. The 25.5mm depth, provides an aero profile giving it significant performance and durability gains over previous rim brake models. The Quill can easily be set up tubeless with the use of our 21mm wide Tubeless tape. Tight tolerances require the use of a low profile rim tape to avoid tire installation issues.
DT SWISS CHAMPION® SPOKES The DT Champion shines in road or light off-road uses, with its unparalleled strength and weight.
PHIL WOOD CLASSIC TRACK HUB Our Classic rear high flange single fixed track hubs are available in 28, 32, and 36 spoke hole configurations. Supplied with standard Phil spec bearings which have full contact seals and have a 100% fill with our Phil Waterproof grease.